Hey Kensheets;
That would be a simple task for v-carve pro from Vectric. It's a very powerful program and can be coupled with cut 3d at a later date to do engravings with 3d images. Good luck. I've purchased most of the vectric packages starting with c3d VCP and finally bit the bullet and now use Aspire. It will take years to learn Aspire due to it's many capabilities.
Hope this helps.
Bill
Oh yea, download a free trial software and give it a whirl before you buy!
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)