Dart, at the rear of the machine in the control panel you should find a document called "Data Management Card"... Take a look at it and see if you have an Option called: "User Task II"... If this option is active create the following program:

Yourfilename.sdf (note that the created file is not a .min file)

spselect: "YourFileName.min,,,q10
end

And that's all it takes..

This is called a scheduled program and is called up just a little differently... In Auto Mode use your extend key F8 until you see the PSelect (I think F1 or F2) press the key and type * <write>... Your list of .SDF files will show just pick the file you want and follow the function key commands... It's been a few years since I've worked those keys so please refer to your Special Functions Manual to confirm key strokes...

FYI: That file can run more than program if you need it to, as in:

pselect: abc.min,,,Q10
pselect: def.min,,,Q10
End

I hope this helps... If you can't find the info in your manual's let me know and I'll get it for you.