588,385 active members*
5,453 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Open Source Controller Boards > YAPSC:10V : The glue between Step/dir and +/-10V servo amp

Thread: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

Results 1 to 20 of 261

Hybrid View

  1. 09-24-2012, 06:39 PM #1
    visky
    visky is offline Registered
    Join Date
    Jan 2007
    Posts
    93

    Question communication problem-please help

    If i send hex code from Glaister ,with this sheme serial com. works ! But with hex code from MaxMod version V1 it doesn't (: . I have tried diferent baud rates , 9800 and 57600 , but no luck. Where is a problem?
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 09-24-2012, 10:29 PM #2
    Schrauber-Malte
    Schrauber-Malte is offline Registered
    Join Date
    Mar 2006
    Posts
    3
    Hello,
    well I think when you connect pin 11 and 12 to a max232 -> pc it should work.
    The baud-rate is 57600. And use 5V as supply voltage.

    Bye
    Malte
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Gecko PID step motor servo
    By Mariss Freimanis in forum Gecko Drives
    Replies: 116
    Last Post: 03-26-2015, 08:54 AM
  2. step motor or servo
    By dcutler35 in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 06-09-2012, 06:18 PM
  3. Servo step multiplier
    By JerryFlyGuy in forum Servo Motors / Drives
    Replies: 8
    Last Post: 05-15-2007, 08:20 PM
  4. Units Per Step For Servo
    By bgolash in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 02-14-2006, 08:46 PM
  5. Servo and Step motors
    By Dre361224 in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 06-09-2005, 02:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules