I'm looking to build/buy a 4x8 table and need some advice.
I have it narrowed down to the precision plasma 4x8 patriot or the Bulltear 4x8 gantry kit (fab the table myself)
I wanted to ask opinions on the positives and negatives of each kit.
What I will use it for is hobby/part-time work. mostly 3/8" thick plate or less with ym PM65. Both use Candcnc.com electronics, and have the same height control. I plan to add a scribe for sure.
Both use mach 3/sheetcam
The benifits to the precision is I can buy a scribe kit, however on the bulltear I will have to fab one. The bull tear however *looks* beefier.
So I guess what I would like to hear is any input on which table you would buy?
Also, this probably should be in another section but what CAD or drawing software is effective but user friendly to export to sheetcam or mach 3?
I have no cad experience, but I'm not a idiot either, I half thought about buying torchmates Cad software, but I can't tell if it exports the right code for mach3.
Thanks for any help, it's greatly appreciated.