Hello Guys!
Is there anyone using INDEX GB65 (GB42, GB100) CNC lathe(s) here?
Or anyone familiar with these?
Would be grateful for reply.
Thanks in advance!
Sincerely, Igor
Hello Guys!
Is there anyone using INDEX GB65 (GB42, GB100) CNC lathe(s) here?
Or anyone familiar with these?
Would be grateful for reply.
Thanks in advance!
Sincerely, Igor
With kindest regards, Igor Kozlov
We have an old GE65. Not the same but a bit similar I think.
We are currently using 3 GB65 machines with the index MBL bar loader
Hi Everybody,
Anybody using INDEX GB65 CNC Lathe. I need help about that. Please contact me
Best Regards,
Jamil
DEAR CO-BROTHER
PL.CONTACT INDEX WERKE GERMANY DIRECTLY FOR ALL YOUR PROBLEMS.
www.index-werke.de/ www.index-werke.de/de/englisch
Index-Werke GmbH & Co. KG Hahn & Tessky. ESSLINGEN GERMANY
Service Hotline INDEX
www.index-usa.com/
+49 (0) 711 3191-600
[email protected]
THANKING YOU
PRADEEP R.KHARE
[email protected]
[email protected]
0091 20 26991640 land line
Hello since Mèxico
I`m new in the forums, I write you because we have a new machine (old index GU600 lathe) but I have german information(operators manual). I was wondering if some body has english manual?
Before Hand
Thanks
hi everybody
i am in trouble i have index gb 65 but it is not working now anybody have parameteres ?
hi igor
i have index gb 65 93 model but not working now i need parameters do you have ?
hi jamil
i am tarık i have index gb 65 but machine not work now i need parameters do you have ?
Hi!
I can send our parameters, but one should be careful with them, because they might differ quite much from machine to machine.
I would recommend to contact INDEX service with your machine serial number.
They are very helpful.
But if you like, you are welcome to specify what parameters you need and I will send a copy from our machine(s).
Sincerely, Igor
With kindest regards, Igor Kozlov
hi,
are you still using INDEX GB 65 machine? I am having problem in turret of this machine, Can you help me please?
Thanks
Jamil