I was not suggesting a rotary table for the lathe?????
A lathe is good for round parts, drilling, etc.
If you need a lathe, get a lathe. If you need a rotary table, get one. Without knowing the type of parts you do it is hard to say how much you would need either.
Matt
Thread: Lathe or rotary table?
Results 1 to 14 of 14
Threaded View
-
12-06-2012, 04:56 AM #4
Gold Member
- Join Date
- Jan 2006
- Posts
- 2985
Reply With QuoteSimilar Threads
-
Adding a rotary encoder to a large Rotary Table
By small.planes in forum Mechanical Calculations/Engineering DesignReplies: 14Last Post: 04-27-2012, 07:27 PM -
rotary table
By cuyeyo in forum FadalReplies: 1Last Post: 06-20-2011, 10:12 PM -
5 axis w/ lathe/rotary table
By living-word in forum CNC Wire Foam Cutter MachinesReplies: 3Last Post: 03-13-2008, 02:20 PM -
How do you use a rotary table?
By ranchak in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-31-2008, 05:30 AM -
Mini-Lathe and Rotary table retrofits
By JFettig in forum News AnnouncementsReplies: 0Last Post: 07-14-2005, 01:51 AM
Posting Permissions
