Hi All,
half way through a cutting job today and my Redsail laser tube stopped, coolant temp had been at a constant 17 degrees.........simply the tube is not firing. Everything else seems normal....just no light in the tube.
I have checked the water flow is fine, disconnecting the water flow lead from the chiller and I can hear the noise the psu makes changes.....likewise when I switch off the laser tube switch.....so I don't think it is the coolant.
I shorted out the cover microswitch just the rule that out.
Any ideas what else I can check? Has the tube died? Psu? there were no signs that anything was amiss before it stopped working. The machine is almost exactly a year old and has only had light use.
Thanks
John