Hi, I have a problem in connecting the PC to my Dyna, we have a DB 9 on PC and DB25 on the Dyna , thus we have connection pins:
2 ----- 2
3 ----- 3
4 and 6
5 ----- 7
7 ----- 5 and 6
8 ----- 4
****** 8 and 20
We use the Mach3 as driver, we tried everything, we configured the ports as well, but there is no communication between the machine and the PC ... what can we do? What is the problem?
We would appreciate any information we can provide.