I wanna see pictures and specs on those 600ipm and above machines.
less than 10 IPM (4.2mm/s)
10-50 IPM (4.2 - 21 mm/s)
50-100 IPM (21-42 mm/s)
100 - 300 IPM (42 - 127 mm/s)
300 - 600 IPM (127 - 254 mm/s
faster than 600 IPM (254 mm/s)
I wanna see pictures and specs on those 600ipm and above machines.
The fastest movement we get is just over 40ips
I cut at 80ipm now jog 120ipm to be safe.
http://www.cnczone.com/forums/showthread.php?t=15139
Joe
Currently I rapid at 1200ipm it could probably go faster, for cutting i can do 600ipm but i usually cut acrylic at 400ipm
http://www.cnczone.com/forums/showthread.php?t=37267