Hi all,
My battery failed over the long weekend lost all machine data programs etc etc !!!
I have disks with everything on them but need to know the process of putting the info back into the machine.
Hi all,
My battery failed over the long weekend lost all machine data programs etc etc !!!
I have disks with everything on them but need to know the process of putting the info back into the machine.
send me your mail, i will email to you the steps.
I have the same problem like madmuz. I have disks too. But i haven't how load it. Do You help me knap?
Hi guys. Me too. Just acquired a Rover 18 which I saw working before I bought - and the internal battery has died and lost all the machine data etc. I have the disks but can't find a way of reloading the data. Any help much appreciated.
Hi. I've got machine data.
Hello Friend. I'm interested in whether and how they could send me a disk with parameters for biesse rover 18 computer is nc481. Because I have the same problem as you do with the battery, and I have replaced the same just missing parameters. Sorry for my bad English,
Thanks in advance!!!
Hola Madmuz
i am from chile , i have one big problem with machine rover 321R error 332 333 no position axis , if posible failure electronic card Rcx2 ?
If you had a similar fault podriar help giving an advice
best regards
Need help !
When I turn on Rover 321 nc481 on screen appears "Bdos Err On C: Select" and that it I cant even hit enter nothing happens! Before that few days it said that the disc A is not ready (floppy) but my diskette is valid.
What i need do to?
I see that you have same problem. My battery die too so I replace but still doesnt boot up.
Same error A floppy, but floppy is working.
What can be.
Can anyone send me some solutions on [email protected] ?
Hi All,
I also have a Biesse Rover 321R with a NC481 controller.
Battery died last week and I have replaced it with a genuine Biesse part.
Machine now boots and everything is reset and in Italian.
I don't have the original set of Floppy Disks that came with the unit.
Can anyone help me out with a copy?
Have contacted Biesse parts Australia but haven't heard anything back.
Cheers
Hi
We have a Biesse a NC481 controller.
The battery died and I replaced it.
Transferred machine data from the floppy disk but did not transfer it.They are all still at zero.
I need help please.
hola, soy nuevo y necesito ayuda mi rover 321 r de biesse controlador cni nc 481 se quedo sin bateriaperdiendo todos sus datos. Al cargar los drivrers se me colgo y no me deja hacer nada, solo arranca boot y me deja errores de falta de controladores ES803 ES58 S023010 S022999 S011 AD58 AV21 AV20 I011. Nesecitaria saber de alguien con la experiencia en carga de archivos plc idioma y valores generales de maquina. Gracias
hola,e visto que hace unos años te ayudaron con un problema similar al mio mi rover 321 r de biesse controlador cni nc 481 se quedo sin bateriaperdiendo todos sus datos. Al cargar los drivrers se me colgo y no me deja hacer nada, solo arranca boot y me deja errores de falta de controladores ES803 ES58 S023010 S022999 S011 AD58 AV21 AV20 I011. Nesecitaria saber de alguien con la experiencia en carga de archivos plc idioma y valores generales de maquina. Gracias
Hi everyone. I have an old 321R with CNI481 contrôler.
The machine today boots but the axis are all in 0.00 and the machine refuses to work.
Error code :
S011
S020101
S023872.
Anyone knows how to fix this ?
The machine boots normally.
Is the battery dead ?
What steps should i follow?
Thanks everyone ????