Mine arrived roughly one week after it shipped from Toronto. It was pretty darned quick! Going by truck, there should not be any customs delay, if the paperwork is done properly - it's all handled at the point of entry.Originally Posted by LeeWay
Regards,
Ray L.
Results 1 to 20 of 1459
Threaded View
-
04-19-2013, 01:25 AM #11
Gold Member
- Join Date
- Feb 2006
- Posts
- 7063
Reply With QuoteSimilar Threads
-
LinuxCnc "Step Time" "Step Space" "Direction Hold" "Direction Setup" values??
By blau_schuh in forum Dmm TechnologyReplies: 5Last Post: 01-12-2014, 07:07 PM -
Need advice Setting Up production: 4 to 8 sq ft of 39" long 1x1" AL Angle daily use
By aluminumwelder in forum Material Machining SolutionsReplies: 1Last Post: 09-27-2013, 08:21 AM -
First "real parts" made on the Torus Pro
By AUSTINMACHINING in forum NovakonReplies: 2Last Post: 05-30-2013, 04:06 AM -
X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
By DaDaDaddio in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-06-2013, 09:59 AM -
Thread Milling using "C" axis no "Y" on the machine
By tejano4life72 in forum Mori Seiki lathesReplies: 7Last Post: 07-19-2010, 08:59 PM
Tags for this Thread
Posting Permissions
