Hi Guys,
Getting ready to pull the trigger on my CNC Router Parts 4848, starting to gather the components before I buy the kit. Building and designing the base for the machine right now and wanted some feedback on the design. Im building the machine base out of all wood. Here are the sketchup designs so far.
Love to get some feedback on the structure or any modifications I should make to add more stability, also are the braces overkill or not enough. Thanks guys.
Materials Being Used:
- 4X4 Wood for legs
- 2X4 Wood for structure
- 3/4 MDF for table top surfaces
- 4X Leveling Casters for feet
All joints glued and screwed. Thinking about bolts for upper table surface to 4X4?
P.S. love this forum
Thanks,
Chuck