I have a Dyna 4400M with the tool changer. It has the Mitsubishi Meldas M3 controller. The cnc was off for several years and not used. I powered it up and of course no monitor. I found a thread on here how to fix it and it worked. The monitor now comes on and I can turn the spindle on but it it gives me a m01 0007 and a M01 0101fault when I try to move any of the axis. The fault light is always flashing. I dont have air hooked to it yet. I also havent messed with the setting since I got it back up. I could use some help. I need the settings and the tool change program. Thanks