Thank you so much for the advices. Didn't know deionized water can be so corrosive. I will stay with distilled water for nowand it's way cheaper and accessible too.
Good nite!
Results 1 to 7 of 7
Hybrid View
-
08-21-2013, 02:31 AM #1
Registered
- Join Date
- May 2013
- Posts
- 9
-
08-23-2013, 10:19 AM #2
Registered
- Join Date
- Nov 2008
- Posts
- 382
Hi there
be carefull with destilled water from publix or wallmart, I had a few gallon standing as reserve for about two month just took a bit out of one and closed it tight and as I wana take them again for exchange the cooling water for the laser again it showed a brownish settlement at the bottom its like murky.
since then I allways just use R/O water from my R/O system.
greetings
waltfl
Reply With QuoteSimilar Threads
-
Water cooled 2.2 KW Spindle water fitting
By dfmiller in forum DIY CNC Router Table MachinesReplies: 13Last Post: 11-26-2013, 06:21 AM -
Distilled Water for Coolant?
By brow318 in forum Tormach Personal CNC MillReplies: 37Last Post: 06-26-2013, 12:21 AM -
Request of water quality for Sino water jet cutting machine
By Sino-waterjet in forum Machinery Manuals / BrochuresReplies: 0Last Post: 03-22-2013, 02:18 AM -
Water jet glass cutting ( water jet seller)
By sizala in forum Waterjet General TopicsReplies: 0Last Post: 03-17-2012, 12:59 PM -
Water transfer techniques for water table?
By Knut in forum Waterjet General TopicsReplies: 3Last Post: 02-02-2007, 04:52 PM
Tags for this Thread
Posting Permissions
