T0700 K2 -After the Tool is called, the Z2 axis is the commanded
Z axis. Also the C2 axis is called up. X1,Y1,Z2,C2 are
commanded from $1. The next T__00 call changes it back.
Thread: Have question on several G codes
Results 1 to 3 of 3
Threaded View
-
09-28-2013, 03:10 PM #3
Registered
- Join Date
- Oct 2008
- Posts
- 108
www.atmswiss.com
Reply With QuoteSimilar Threads
-
G codes and M codes for Mazak Quick Turn T-2
By sauli in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-23-2011, 05:22 PM -
G codes M codes Mach3
By eaglezsoar in forum Mach Software (ArtSoft software)Replies: 2Last Post: 02-04-2011, 12:38 AM -
Need full list of G CODES AND M CODES FOR FANUC 21I
By SonnyTees.com in forum G-Code ProgramingReplies: 3Last Post: 02-23-2010, 05:27 PM -
M-codes and G-codes 4 Matsuura ES-1000V
By maximusek in forum G-Code ProgramingReplies: 2Last Post: 11-27-2007, 01:41 PM -
Spare M Codes Question?
By AMCTony in forum Haas LathesReplies: 12Last Post: 09-14-2007, 03:59 AM
Posting Permissions
