May I learn your motor type, driver model, TPI value of screw and power supply voltage if your machine IPM value bigger than 600.
less than 10 IPM (4.2mm/s)
10-50 IPM (4.2 - 21 mm/s)
50-100 IPM (21-42 mm/s)
100 - 300 IPM (42 - 127 mm/s)
300 - 600 IPM (127 - 254 mm/s
faster than 600 IPM (254 mm/s)
May I learn your motor type, driver model, TPI value of screw and power supply voltage if your machine IPM value bigger than 600.
tpi value is 5.
Is it possible above 200 ipm with 5 tpi with a stepper system.