Hi ive been a new company for a few months now where the bulk of the work is mould tooling but some of the jobs are quite difficult to machine and require the grinding of inserts and too lholders etc i say quite difficult as i am originally from from a high production make them fast sell them cheap automotive environment where i've never had to grind inserts if we didn't have a tool we had it made ordered it or declined the job.

I've included a dxf file of a job similar to one i'm currently doing which is of smallish diameter with an internal profile and have had to grind back and clear 2 vcmt style inserts one on a boring bar with a 27.5 degree face angle and the other on a horizontal toolholder to clear the top of the profile whilst machining the bottom part of the rear face pocket upto the centre of the rad my main question is does anybody know of any tooling out there readily available that would be capable of doing this part ideally without the need for any tip lapping/grinding or at most minimal tip lapping /grinding

Thanks in advance for any help provided