Hello everybody. I really need help before the 30 days from receiving period expires.
I bought this kit:
4x NEMA 34, 1600 oz in plus power units, drivers and breakout board.
I wanted to test everything today, so i started wiring, following their "scheme" that looks like it has been drawn by a 3 year old kid:
Attachment 211262
I've verified accurately every connection 3 times before plugging the power cable (not that there was that much to check for the power of the drivers that could go wrong or damage something (line and neutral)) but i cannot see any led "alive" on the drivers, and no "thump" happened to the motors when i powered up the kit.
I also have no signal from the parallel port. I've tried to check with a tester while using the arrow keys in mach 3, and i see the axis moving on the program but i read no +5v on the tester at the pins.
I also attach here a pic of my test wiring, a pic of the whole kit (just for the sake of it), a pic of the detailed driver wiring, and a pic where you can see power on the breakout board and power units, but not on the drivers.
Attachment 211264Attachment 211266Attachment 211268Attachment 211270Attachment 211272
Thanks in advance and sorry for the loads of info at once, but i really need some help