Hi all,
I am trying make a modification into an existing piece of material with complex geometry. I have a cad file for both the existing part, and a separate cad file for the part with the changes I want to make.
What I want to do is have the stock that I start with be the original cad file, and the finished part be the modified cad file.
I figure they must have built this feature into the software if say for example one needs to machine a casting.
I see the option in stock wizard to pick an ".stl" file, but it seems to screw up my dimensions when I open it. Is there a way I can open the stock just as an .step, just like I do for the part to be machined?
Thanks!