F-Engrave With GRBL
For users of GRBL I put together a Blog Post describing the issues with F-Engrave and the settings needed to generate g-code that will work with GRBL. Below I listed the settings needed (without the long explanation from the blog post).
F-Engrave settings needed to generate g-code compatible with GRBL:
- Select the “Disable Variables” box in the F-Engrave Settings window
- un-select the “Enable Arc Fitting” box in the F-Engrave Settings window
- Use F-Engrave Version 1.34 or higher
Scorch
www.scorchworks.com