I just bought a used CNC mill, and it has VM5 with it. I am lost.
I have drawn a simple 1" x 1" square that I was trying to have a pen draw on this mill to test how it is working. I cannot figure out how.
I select the region PolyLine0.
Choose 2 1/2D profiling.
Generate
What post processor do I use for HobbyCNC Board?
This is what I got for a 1 x 1 square profile cut.
G90
G20
S4583M3
G0X-0.5Y-0.25
Z0.3125
G1Z0.F7.3
X-0.25F3.7
X-0.2012Y-0.2452F2.7
X-0.1543Y-0.231
X-0.1111Y-0.2079
X-0.0732Y-0.1768
X-0.0421Y-0.1389
X-0.019Y-0.0957
X-0.0048Y-0.0488
X0.Y0.
Y1.F3.7
X1.
Y0.
X0.
X-0.0488Y-0.0048F2.7
X-0.0957Y-0.019
X-0.1389Y-0.0421
X-0.1768Y-0.0732
X-0.2079Y-0.1111
X-0.231Y-0.1543
X-0.2452Y-0.2012
X-0.25Y-0.25
Y-0.5F0.393701
G0Z0.3125
M02