588,671 active members*
6,341 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Autodesk > Bolt hole spacing on a flange

Thread: Bolt hole spacing on a flange

Results 1 to 5 of 5

Hybrid View

  1. 03-14-2006, 10:37 PM #1
    mxtras
    mxtras is offline Gold Member
    Join Date
    May 2005
    Posts
    1810
    ...or you can draw the bolt circle centerline and use 'divide' - divides the entity into whatever number of equal length segments.

    Array is the better option as the divide command leaves invisible points in your drawing and can be troublesome if they are not removed.

    Scott
    Consistency is a good thing....unless you're consistently an idiot.
    Reply With Quote Reply With Quote
  2. 03-14-2006, 11:24 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    Quote Originally Posted by mxtras
    Array is the better option as the divide command leaves invisible points in your drawing and can be troublesome if they are not removed.
    Scott, they're not invisible, they're just hard to see.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules