Prolight turning center mach 3 conversion
I was referring to traveling 300 degrees forward to the next position called as an example. On a bidirectional unit it could be as little as 60. If you look at the macro, the backing up against the pawl takes very little rotation (10 units or 3.6 degrees). I, like you think that micro switch is a home switch. If you need it to go faster (even as a single direction changer), turn up the feed rate.
Understood on the solenoid. Though how hard would it be to install to gain bidirectional capabilities? Ok maybe that is another project ;-)
A lazy man does it twice.