[cnctoolman]

I have solid model available aswell. material to be 6061. The smaller tapped holes are all 6-32 with a 3/8" depth of thread to be clarified. USA based shops only.
If you need the model let me know what email to send it to.

Also, if you can measure consistent with calipers, then we are good on the tolerances on the print. Don't over complicate this part.

Thanks

overall length is 1.750 +/- .005

[annoying]

What is the overall length?

[cnctoolman]

1.750" +/-.005

[cnctoolman]

1.750" +/-.005

[Matt@RFR]

When do you need the parts by?

[cnctoolman]

end of April if possible

[Matt@RFR]

Thanks. I'm scheduled out to mid June, so I'm out. Good luck.

[wayne.penhollow]

Do you have a print



Sent from my iPad using Tapatalk

[slwong18]

Hi,

Please contact us at [email protected] or you can submit the drawing/3D file to our website (www.prototree.com) for free quotation. Thanks.

Hope to receive your response soon
BR
/SL Wong
Sales Manager
Prototree
website: www.prototree.com
e: [email protected]

[cnctoolman]

Job has been awarded out. Thanks to all who put quotes in.

[Jacksonqin0305]

Hi,this is Jackson, mechanical manufacturing engineer with extensive field knowledge and work experience and my factory located in the world manufacture base center Dongguan/Shenzhen,China,
we offer Lathe and Milling/sheet metal fab/parts stamping service, any new works,
Just contact me,[email protected] / whatsapp+86 13532883201