I am running win xp but I do have question. Since ethernetsmooth stepper emulates 3 parallel ports should there be 3 port in device manager?
I am running win xp but I do have question. Since ethernetsmooth stepper emulates 3 parallel ports should there be 3 port in device manager?
Thank you for your support in developing better cnc experiance.
Scan my avatar with smart pnone ...... http://www.big-tex.tk/
No, the ports are only available to Mach3.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Gerry
I got strange issue.
I would like to run 2 bobs, this is one of the reasons I went with smooth stepper.
I do know for fact both bobs are fully functional.
Here is what is happening.
If I swithch output 1 from port 1 --------- pin 1
to port 2 ------ pin1
second bob does not respond its not turning on and off output
any idea?
Thank you for your support in developing better cnc experiance.
Scan my avatar with smart pnone ...... http://www.big-tex.tk/
Stanger inputs work but gave me idea how to fix it
Thank you for your support in developing better cnc experiance.
Scan my avatar with smart pnone ...... http://www.big-tex.tk/
I've never used a SS, so I really don't have any idea.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)