Brad......that 650 was at 300 inch per second acceleration which put the G's on the X and Y axis' at .77+!I may need to scale that back just a bit, it will still be very fast.
Results 1 to 20 of 107
Hybrid View
-
07-01-2014, 09:01 PM #1
Neuer Benutzer
- Join Date
- Aug 2007
- Posts
- 359
Re: Another Mill - Haas, Another Tormach, or a Novakon?
Don't have to be too bright to be me
Reply With QuoteSimilar Threads
-
Tormach 1100 S3 using Tormach 1.5" face mill....
By dneisler in forum Tormach Personal CNC MillReplies: 24Last Post: 05-06-2015, 04:50 AM -
Tormach v. Novakon - Opinions?
By sansbury in forum Tormach Personal CNC MillReplies: 24Last Post: 06-06-2013, 04:20 AM -
Tormach TTS vs Novakon vs Smithy
By TangentAudio in forum Benchtop MachinesReplies: 17Last Post: 02-03-2013, 12:38 AM -
One reason why I chose the Novakon CNC machine instead of the Tormach CNC machine
By iGAK in forum NovakonReplies: 32Last Post: 12-26-2012, 03:29 PM -
Novakon nm-200 or tormach pcnc 1100?
By rppman in forum NovakonReplies: 21Last Post: 12-14-2010, 07:26 PM
Posting Permissions
