I am working on a Mecof agile CS 500 with Fidia controller.
As we process relative deep pieces, it is very time consuming always having to retract the virtual axis (w-axis) 0.3m/min with each tool breakage in order to change the indexable inserts.
My question now:
Is it possible to approach a tool change point in the program with HOLD or at least change the 0.3m/min with a higher value??
Many thanks in advance
Regards
Thread: Fidia, tool change point
Results 1 to 8 of 8
-
03-12-2012, 04:54 PM #1
- Join Date
- Mar 2012
- Posts
- 11
-
03-12-2012, 05:16 PM #2
- Join Date
- Apr 2005
- Posts
- 323
Hi
Why don’t you press Pause and then roll out with the hand wheel...then you give the speed.
Regards Karsten<!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->"Menschen mit einer neuen Idee gelten so lange als Spinner, bis sich die Sache durchgesetzt hat."<!--sizec--></span><!--/sizec--> <!--sizeo:1--><span style="font-size:8pt;line-height:100%"><!--/sizeo-->Mark Twain<!--sizec--></span><!--/sizec--><br /><br /><br />CAD/CAM<br /><br />Programmierung - Prozessoptimierung - Automatisierung <br /><br />www.vcc-production.eu
-
03-15-2012, 07:40 AM #3
- Join Date
- Mar 2012
- Posts
- 11
im "HOLD" kann ich aber keine Achse anwählen.
zumindest bei der Fidia C10 funtioniert das nicht.
-
03-15-2012, 02:14 PM #4
- Join Date
- Oct 2007
- Posts
- 43
Hello
As Kassi already said you have to press the PAUSE BUTTON- that’s the one next to the Hold button. Then the memory goes empty and after 20-50 blocks the NC will stop. So now you can run with your W axis until China, also in rapid traverse!
Try it out, it will works!!
-
03-16-2012, 06:07 AM #5
- Join Date
- Mar 2012
- Posts
- 11
That really works =)
Thank you guys!!!!
The only problem it that the machine stops after 300 blocks.
Can I shorten that somehow??
-
03-16-2012, 06:20 AM #6
- Join Date
- Mar 2012
- Posts
- 11
No, that would be at the expense of the Look Ahead Parameter.
-
03-16-2012, 10:38 AM #7
- Join Date
- Oct 2007
- Posts
- 43
Okay, I don’t know what that is but alright...
However when the insert breaks then of course I have to exchange it immediately not after 300 blocks.
Hope you can give me some advice!
-
03-16-2012, 12:04 PM #8
- Join Date
- Mar 2012
- Posts
- 11
Okay, I don’t know what that is but alright...
However when the insert breaks then of course I have to exchange it immediately not after 300 blocks.
Hope you can give me some advice!
Reply With Quote
Posting Permissions
