Hello everybody
I’d like to connect a CRT display to my notebook (hp with 15,4” monitor) via VGA-port for a better working with Inventor. And I’m going to operate it paralleling to the 15,4” one. Is it possible? If it is, then how? O I have to adopt anything?
The notebook has Nvidia Ge Force4 440 Go 64M graphic card and an AMD Athlon 64 processor 3700+
I’d appreciate your help very much.
Regards, 4runner
Thread: Connection of the second monitor
Results 1 to 4 of 4
-
03-05-2009, 05:45 PM #1
- Join Date
- Dec 2002
- Posts
- 489
Wissen ist das einzige Gut das sich vermehrt, wenn man es teilt.
-
03-05-2009, 06:02 PM #2
- Join Date
- May 2007
- Posts
- 672
Hi
If your graphic card hands it over…
1. it has to have 2 video gates that can be used at the same time (one is attached to the own monitor)
2. 2. Software has to be able to run the both monitors at the same time – which one is primary, where the desktop has to be etc. etc.
Greetings Thomas
-
03-05-2009, 06:55 PM #3
Junior Member
- Join Date
- Apr 2002
- Posts
- 5003
Take a look backwards. A 3-rowed 15-pole port has to be there. And probably additionally a white 24+5-pole port. Still it can happen that the built in monitor and the external one will show the same things. Usually it stands in the manual.
-
03-05-2009, 07:09 PM #4
- Join Date
- Dec 2002
- Posts
- 489
@uli12us
There’s a 15-pole-port… I’ll “contact” then the manual
@myca
I’ll test it at the weekend. We’ll see…
Thanks a lot for your advices
4runnerWissen ist das einzige Gut das sich vermehrt, wenn man es teilt.
Reply With Quote
Posting Permissions
