Re: Torus Pro - Spindle Inoperable
Originally Posted by
bill south
Thanks Guys;
I did some voltage checks as Ray recommended and this is what I have.
s=6000
m3
forward 5 bolts
reverse 0 volts
m4 forward 5 volts
reverse 5 volts
I disconected the bob and jumpered to forward and did get spindle movement. So, not the VFD.
Has to be my settings.
ports and pins (motor outputs)
Spindle checked enable;
step pin number 16
direction pin number 0
direction low active not checked (red x)
step low active checked (green checkmark)
Step port 1
direction port 0
Would someone please checked their system with the new BOB and let me know if this is correct.
One other thing is with M5, both forward and reverse is at 5 volts which is the same as a m4 command. Seems incorrect to me.
I'm most likely overlooking something kind of like, can't see the forest for the trees.
Help is appreciated.
Bill
spindle checked active.
Direction port 0 ?
That does not sound correct.
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.