Hello All,
I'm looking at retrofitting a K&T horizontal machining center with a Camsoft professional control system. I've heard good things about Camsoft but all second hand or from salesmen. Not discounting what i've heard/been told; would anyone who has lived with it on a daily basis care to offer opinions on how good it really is?
My shop has a limited budget and we'll only get one shot to do this right.
I've read the sales literature and the system seems well thought-out and solid. However, I've found the most reliable evaluation to be the experience of those who have actually had to use it to earn a living.
Thanks for your help.
Ray