Good to know that they'll fix any bugs that you find.
Results 1 to 9 of 9
Hybrid View
-
10-13-2014, 03:17 PM #1
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35494
Re: X/Y probing macro - G31 code trouble
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Trouble posting code
By Milton in forum BobCad-CamReplies: 3Last Post: 12-26-2012, 07:14 AM -
Circle Help Trouble getting the right code.
By ibuildstuff4u in forum G-Code ProgramingReplies: 3Last Post: 12-29-2009, 04:49 PM -
Syntec 900 M macro and probing
By PROBE in forum Controller & Computer SolutionsReplies: 2Last Post: 12-15-2008, 05:20 PM -
macro's for probing?
By REVCAM_Bob in forum G-Code ProgramingReplies: 2Last Post: 06-10-2008, 02:17 AM -
Trouble with DXF to G Code Transfer
By mlapacz in forum SheetCamReplies: 8Last Post: 03-04-2007, 07:25 AM
Tags for this Thread
Posting Permissions
