Your Arc Light table and you Hypertherm 85 plasma will work with our new DCC (Dynamic Cut Control) feature. It lets you store the plasma parameters in the SheetCAM JOB file (things like the Preset Volts for that material, the DTHC Delay time, and if you have the optional RS485 kit from Hypertherm and our Advanced Connection Kit, you can even control the Cut current and air pressure presets. When you load a file all of the settings are loaded for you. It even tells you which nozzle size you should be using. The Tool table in Sheetcam becomes your Cut Chart. I won't go into all of the other stuff you can do with it because it sounds like fiction.
You do need updated versions of MACH3 and SheetCAM TNG and our updated installer. Everything is FREE. I know you have some time ahead setting up the table and getting it tuned in but Scott can give you lot of help for that.
If you want to read more about the DCC features go to the New Products tab on my website and the
DCC install manual tab. Get the manual and it will show you some examples of the new tools in SheetCAm and for using the DCC.
TOMcaudle
www.CandCNC.com