Hi all,
Ok, I bring back this thread from the dead!
2 years already!
Just to follow up on my Laser machine, if some are interested.
I am still very happy with it, and the machine is performing flawlessly! Not a single issue, rock solid!
And of course, I have a question for the Gweike / WKLaser team.
![Smile](images/smilies/smile.png)
I would like to change the tube from 80W to 100W. I believe this is possible in my machine (this was an old discussion!).
Also, as I read back the thread, especially about cutting aluminium, I had a chat with Tina at the time after some of the posts, and she did indeed confirm that it was not possible with 80W, or even 100
![Smile](images/smilies/smile.png)
While some European manufacturer were still saying that I could. I tried, out of curiosity, and I can't. Just to correct the facts on the thread.
Anyway, all in all, after 2 years of good service, very very happy with my choice of machine, and if I had to buy a second one (hopefully!), this will be from the same people.
Fred