Re: Mach3 ports and pin set up need help please
The ports and pins setup is very specific to your machine and the equipment that you are using, driver(s), steppers, rack & pinion, ball screw, etc. Without any of that pertinent information you might as well throw the dice and guess..
The manual for Mach3 contains much of the information that you are seeking and I would suggest giving that a read and then posting back with some more specific questions that the forum can assist with.
Adam,
Gecko G540, Rack and Pinion Drives-X and A axis, 1/2-10 5 Start Acme-Z Axis
4-THK HSR 25 Linear Slides, KL23H2100-35-4B, Power Supply-KL-600-48 48V