More original legs :-)
More original legs :-)
www.4dwood.ru
www.carvedbalusters.ru
Baluster.
www.4dwood.ru
www.carvedbalusters.ru
Chair legs
www.4dwood.ru
www.carvedbalusters.ru
Excellent work the table came out great very nice. I also like your machine looks very well built.
http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html
Now I make Turn Mill Lathe CNC.
Two cutter + spindle.
As will be made autoload
www.4dwood.ru
www.carvedbalusters.ru
www.4dwood.ru
www.carvedbalusters.ru
Very impressive machine good video.
http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html
Acrylic stone baluster
www.4dwood.ru
www.carvedbalusters.ru
As always, simply amazing work, how do the acrylic balusters hold up in use? Do they remain straight or warp slightly?
cheers, Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!
How are you controlling the 4th axis in lathe mode and 4th axis mode? Are you using two different motors? What control software are you using?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
A axis - the axis of rotation of the cutter 1 - C-axis cutter 2 - axis Y, router - axis Z. uses 2 different maotora on the axis A - first for turning, asynchronous, second stepper drive with harmonical drive.
Switching carries on board made me Pic16F877A. Controlled Mach3.
www.4dwood.ru
www.carvedbalusters.ru
I have a lot 3d models for cnc carving and 3d printing
ART for CNC
New legs.
Because with requests from other countries want to clarify - Our shop does not work with countries to impose sanctions against the Russian Federation , as well not work with individuals and organizations promote ideas of homosexuality. Sorry.
www.4dwood.ru
www.carvedbalusters.ru
nice work dude
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
www.4dwood.ru
www.carvedbalusters.ru
www.4dwood.ru
www.carvedbalusters.ru
Feet billiard...
www.4dwood.ru
www.carvedbalusters.ru
My homemade lathe CNC milling machine in automatic mode.
Turning + Milling balusters first launch automatically, slowly.
https://www.youtube.com/watch?v=9phvlj3tOdA
check the accuracy of the second turning and milling
https://www.youtube.com/watch?v=OMqauxWp3iQ
the machine has not completed yet and in fact is the machine layout for the experience and debug macros.
www.4dwood.ru
www.carvedbalusters.ru