40fordcoupe
Yes small business/residental is 220/240 is single phase, or sometimes called split phase
40fordcoupe
Yes small business/residental is 220/240 is single phase, or sometimes called split phase
Mactec54
Since when does voltage have to do with how many phases there potentially are, I must be working at a fantasy job where my incoming power is 240 3ph
You sell lots of power supplies yet say that a power supply rated for 120/220v should not be hooked to 220v because it causes problems. I made a joke about hooking up to two phase, but then really my house gets two phase from the electrical pole by the road does yours not?
Mactec54
Hmm, if your house only gets one phase it must take a long time for you to cook a turkey.
There is a subtle difference between "1 phase" and "single phase".
I have 240v single phase in my house!
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I was very happy coming across this thread and clarifying this for me. I'm in the US and in order to achieve 220/240 volts for hooking up some appliances and machines I always thought I was using 2 phases and was very confused when called a single phase.
I hooked up many things this way and was always nervous hooking second line to Neutral...LOL, knowing a little sometimes is more dangerous than knowing nothing at all.
This brings me to my question and reason for search.
With the choice of wiring the power supply with 110 or 220 are there any advantages or disadvantages of the 2? I noticed in specs of my PS that it uses less amps it wired with 220v.
Thanks,
Dan
Mainly a question of convenience, less current on 240v but the same wattage O.A.
I have one coming in I will do some empirical testing on.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Just an example, lets say you were supplied three separate pairs of conductors, each pair were from a completely different source and measured 240vac all 50Hz or 60Hz, no other ground or neutral supplied.
The three sources were 1/ one phase from a 3ph transformer and the star connection, 2/ across two phases of a delta connected 3ph transformer, 3/ 240v from a N.A. C.T. single phase residential transformer.
Any piece of test equipment used would identify all 3 pairs as single phase 240vac, which is essentially what they are. and any equipment hooked up to any of the pairs would see absolutely no difference and you would not be able to distinguish any difference whatsoever.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Now I'm confused again...lol. Only kidding, and thank you for your explanation.
I think I should edit my first post from knowing a little to "knowing very little". I went out of my way to run a new three wire line and a new 2 pole breaker to panel. When specs read 220 volts used less amps I assumed I would be using less electric and would be better for PS. Now that I know it wouldn't make a difference I may hook it up with 110v and free up a slot in my electrical panel.
Thanks again
Dan