Hi all...i need to created some of m_code of personal user at hcn 6000 matrix controller...some body can show us what the parameter n how to call the sub prog...what i know is J parameter..
Hi all...i need to created some of m_code of personal user at hcn 6000 matrix controller...some body can show us what the parameter n how to call the sub prog...what i know is J parameter..
J65 is used to tell the control what sub program to execute.
J66 is used to define the M code that calls it.
So, if J65 is set to 1234 and J66 is set to 25 them M25 would call sub 1234
Tq brother....noted...