Hi, I am a relatively new knife maker from South Africa. I want to get into cnc machining and build my own hobby cnc mill one off these days
Hi, I am a relatively new knife maker from South Africa. I want to get into cnc machining and build my own hobby cnc mill one off these days
hi all, I am 28 from Italy. I'm study system engineering.
Hi everybody,
I'm new in this amazing cnc world, I´m wondering in buy a desktop cnc in order to make little pieces or some pcb, but I´m not sure what to buy a Zen toolworks kit 7x7 or a shapeoko 2.
What do you think about those machines?
Thanks so much for your time and congratulations for this community.
Hello, my hobby is mechanical
Hello all, I've been a long time lurker and finally decided to register so that I can ask a few questions.
I have spent the past 5 years working on oil drilling rigs and finally decided to take the plunge and start a small business. I have built a 3d printer, a CNC router and converted a G0704 to CNC. I'm an avid shooter and do some gunsmithing too.
I use TNC355 Control
BUT i'm lost Parameter
So Stop Short my machine......i need parameter for TNC355.
MP0~ MP300
PLEASE!!!!!!!!! help me
Send for me. [email protected]
Just trying to figure out how to navigate around this site. Had problem earlier trying to communicate. It said to many tags?
New at CNC machining! Need help on learning TurboCad, LazyCam and Mach3.
I just started learning cnc and machining. I've worked as a drafter before. Now it's time to bring the drawings to life.
hello, i´m new at cnc, just buy a chinesse router cnc, the best way to have one in Mexico.
Hola, soy nuevo en el cnc, acabo de adquirir una maquina china.
Hello all! I am engineer from Russia, now I am CNC-programmer. I've created more than 3000 programms for lathes and milling centres by this time. I am interested in metalworking technology, CAM systems, verification systems like VeriCut, modern tool solutions.
Hello All! I am new to CNC and am currently building the KRMx01 CNC. I have always wanted one and actually have built a few 3D printers and figured what the heck, if I can do that, I can build a CNC. I plan on creating custom carvings in my cabinet doors, (which by the way, I built all of the cabinets in my kitchen from scratch), cutting aluminum, etc. After I play with the KRMx01 I am going to build an 02 model. Learning and building new productive things are fun and I'm having a bunch!
I trust if I have any issues someone on here can point me in the right direction and hopefully soon down the road I can return the favor by helping some else...
Hi,I work for a sub contracting engineering company. Just here for advice and info. Looking forward to being part of the forum.
Dave
Hello everyone, I'm a Machining Student seeking knowledge
Hi Folks,
I am having an urge to build a CNC machine. I like wood and metal, so a very sturdy gantry machine looks like the thing.
I am also a LinuxCNC fan but have not done much with it recently.
I a grateful to join. Good Luck on all your project
hi friends,
Vishal here from India.i am working as a maintenance engg. , i have same problem in our fanuc 15TF controller.
1. System alarm
02:411D:01:4040:0016:0094H581
ROM PARITY :PC010
i try to resolve this.
Hello!
I'm new at cnc. I have had problems my cnc equipment in the past. And always looked at CNC Zone to solve the problem. So I thought I might as well join, this Great group.
Hello,I am new to CNC.
I've been out of machining for almost 20 years and am trying to get back in the groove with the small lathe and mill I just recently bought.
I was doing some woodwork - building sliding shelves in a large alcove of the house, where none of the walls are flat, plumb or square to anything - when it suddenly hit me how much I missed making steel chips fly and the (almost) guaranteed precision obtainable with machine tools and good set-ups.
Here's to all of us old Rapid-feed Rammers and Crossfeed Crashers!