(I live in a country with limited electrinics components suppliers specially in this time)
(I live in a country with limited electrinics components suppliers specially in this time)
i use l298 by there self all the time just get some from china you can get them for a dollar or more than the l298 and l297
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
Is there a reason why you can't order parts from China on Ebay? Shipping is free but can take 2-6 weeks. I normally order parts ahead of time.
I recommend the tb6600 chip. The circuit is simpler than the l297/l298 and works much better. I consider the L297/l298 to be obsolete.
H500 i can't get electronics to syria write now because of the international situation
Any way i will try hard to get drivers from china
If i can do that should i get the tb 6600 or allegro chips like a3977 or newer?? Or pre-assembled polulu drivers??
I found that maybe i can get the TA8435H/HQ what do you think about it? Lonewolf55 maybe you can help me too
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
I don't understand why you would say that ???
I understand this is not a Political Forum, but Facts are Facts, I'm sorry that a person that wants to try to build an open source Product cannot get the required parts, what a bunch of Bull****, I feel sorry for the man, that he cannot get parts to use to enhance his education.
Right the L297/ L298 is old and considered obsolete (so am I ) it will still drive a stepper motor if that is all you can get, and in it's time was not a bad choice..... I agree with you the TB6600HG is much easier to work with and also better suited for the Motor that taalabash has.
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
No you gave no Offense to me, I was just Curious .... I understand what you mean now, I just wasn't thinking in those terms... but ya unfortunately there is prejudice every where, well I know people are here from all over the world and if they want electronic Help I'll do best I can to help, I don't care where or who they are if I think they are asking help for Educational reasons.
Thanx for explaining... BTW I'm from the Country of Texas (wedge)
BTW I have some Relatives in Auckland
I through Texas was a lone state I mean lone star state
they are jaffa`s then (they will know what that means)
Just a silly thing I came across once was when I worked in Thailand they look at you like dirt in the area where I was working until they found out I was a kiwi you wont like the reason why just to say kiwi`s were not based in that area the pom`s yanks and auses where.
the kiwis went to that area for there R n R
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
ya I know Kiwi Club in Saigon, I was Jolly Green in the USAF back in that conflict, I was stationed at NKP Thailand ... flew combat SAR from there in HH-3E's also did LRP escorts
I know :cheers:
ne way back to our friend's topic ......
Thank you guys for your help especially lonewolf55
If i can get the TA8435H i will use it because it is a little bit similar to the tb6600 (that what i found)
Maybe it's hard to get some basic parts in here but i think that will let me learn alot about every circuit i want to build
And i think if i can get all parts easily like pre assembled drivers maybe then i will learn only wiring even without knowing how things works
I am trying to get my goal (3d printer) in every way i can and maybe in future we will be able to get parts like you over Internet or whatever... But i can't wait to then :-)
yes that TA8435H is a better choice.
everything you need for making PCB for it you can find in the RAR file towards bottom of this web page....
Bipolar Stepper Motor Drive Circuit with TA8435 PCB | Electronics Projects Circuits
Lonewolf55
Again you give exactly what I need thank you
I have a question just for learning purposes
Why can't we use the l297 with four transistors as i mentioned before to make a easy bipolar driver??
Is there any reason rather than it supports only 1 and 1/2 step modes??
There is no real reason, in fact it's done with other driver IC's all the time, in fact you could do the same thing with the TA8435H, if I was going to drive a stepper that needed 8 amps with the TA8435H then I would build a bridge of Power Mosfets on a Heat sink to drive the motor itself.
the L297 is just what folks call old Technology doesn't mean it's bad.