Well , after the so fun merry go around trying to get something done . The last ditched effort finally arrived . 2 Gerber Dimension 200e ( Engraver / Router ) vacuum tables .
Yes they are ancient in a manner and discontinued to boot but they are complete in a fashion and ready for some 21st century tweaking . They both have the engraver heads , 1 dust boot/shoe , all the electronics , cables . They are in very good condition ( electronics unknown yet ) and not all chewed up or abused severely .
Dimensions and specs so far ; 12 mm dia rails and corresponding bearing blocks ( insert bearings ) , 12.50 mm dia lead screws 10 threads per inch on all axis , Superior Electric Slo-Syn Motors ( steppers ) Type M063-LS-516 , 2.25 volts DC , 4.6 Amps , Steps? Rev 200 Rpm @ 60 Hz ( 6 Pin Connections ) , Yes the word on them is that they are slow as a snail BUT we have the technology to fix that .
Why 2 of them ?? It was a package deal and the price was better than that UPS fiasco for the last month . They actually arrived . Will I use the engraver heads , unsure as of yet . Raise the Gantry for more clearance , yes sir . Needs a router mount though , and most likely more reliable up to date electronics package .
So here are a few pics for the time being . They may not be to impressive to some but the size was so in the considering factors .
Attachment 274062Attachment 274064Attachment 274066Attachment 274068Attachment 274070 Attachment 274072
Data sheet for those particular motors