Quote Originally Posted by jonnyk2 View Post
woohoo i figured it out, and boy do i feel silly. So on the inverter controller the p/u and ext were lit up simultaneously which is a function that allows the use of external controls (like wincnc) and the parameter unit on the VFD to control the inverter. I went into program 79 and changed the setting to 2 which is ext only...and voila it works perfectly now. Thanks so much for your help hub, I hope i can return the favor sometime.
I'm very happy to hear you got it working
My VFDs don't light up the PU & ext simultaneously when P79 is set to 1.. That's why i didn't think of suggesting setting it to 2..