Good morning!
I've just started a role in IT support for a company, as it turns out this company have a number CNC machines but very little in house knowledge of fixing problems so I'm hoping someone on this forum might be able to point us in the right direction.
We have a Microweilly Lathe TY-26TR-CNC with a Fagor 8055T controller, it was bringing up an error message that the battery voltage was low, the machinist found the battery (AA battery soldered in) and replaced it. Unfortunately upon turning the machine back on it was found that all the parameters and subroutines are now missing. Does anyone know if there is a way of restoring this data?
I've found an old backup from several years ago (a series of .PIT files) however I'm unsure as to how to restore it to the machine, I have also been advised by another machinist that there may be away to restore it from its cache?
I've read through the manual and according to it I should be able to go to /<STATUS>/<CNC>/<BACKUP/RESTORE> however in the /CNC/ screen there is no softkey for BACKUP/RESTORE
Any help will be greatly appreciated!