Originally Posted by
MargoCNC
thanx for trying guys
to explain it a little better, I cut the profile of the part on op.1 down to a depth of 1 1/2". which leaves a step or ledge all the way around the stock material.
now on op.2, once I get down to the ledge of the stock, bobcad still runs a toolpath in air, down to the full depth of the part.
on the cam software I was using, it see that there is no more stock there, and wouldn't create a toolpath.
I'm just wondering if bobcad can do this, or am I missing something?
thanx