Dear all,
I have DOOSAN TT1800MS , two three days before i was having a battery alarm in the ac servo so i replaced the battery and the alarm from the servo drive was gone but the machine was not able to be referernce so i changed the 1815parameter , now the machine is refernced but daily when i am turning ON the machine i am getting alarm300 x and z asix ZRN . please help me out dear
Results 1 to 20 of 8430
Threaded View
-
06-09-2015, 07:53 AM #10
Registered
- Join Date
- Jun 2015
- Posts
- 11
Re: Welcome thread-tell us about you.
Similar Threads
-
Thread spec for camera lens filter thread
By cmays in forum MetalWork DiscussionReplies: 6Last Post: 07-20-2016, 10:43 AM -
Thread Mill Wizard - Slanted thread produced
By ngr1 in forum Mach Wizards, Macros, & AddonsReplies: 5Last Post: 07-22-2012, 07:23 PM -
Special ID thread. sp-400 "M" type thread 8TPI
By Captain Crunch in forum MetalWork DiscussionReplies: 1Last Post: 04-05-2012, 09:39 AM -
acme thread combos and thread mixing
By calaber40 in forum Linear and Rotary MotionReplies: 5Last Post: 05-16-2009, 02:04 AM -
Thread mill external NPT thread
By cutting edge in forum MetalWork DiscussionReplies: 11Last Post: 09-15-2008, 02:33 PM
Tags for this Thread
Posting Permissions
