Hello.

I have 3 servo motors. Danfoss ISD 410. Thet seem to be very robust and high torque and precision thus I want to use it in my milling Cnc machine project.
But the obstacles I am facing now is to figure out how do I interface this motors to my computer so I can run it with mach3 software or any other equivalent.
The motors have 4 data pins. They are can high can low can ground and can Vcc . Plus the power inputs, 300 VDC.
Now I know can bus is a comunication protocol, but I am having trouble to figure out what kind of control board will communicate with my computer port and send the g code signal to the drivers the motors have the drives integrated in the housing so the pins are to the drive and connection from drive to the motors are internal..
Any ideas to help me figure this out? The manufacturers docments states that the drives understand Iec 61113-3 standard.

Enviado de meu SM-G530H usando Tapatalk