ATTN Corey or Ahren, Still needing your help, I currently have my Huanyang Model HY02D223B VFD and 2.2k Spindle up and running. I am very pleased with the performance for now, I plan later down the road when finances are better stepping up to your spindle and vfd kit since the Custom CRP560-00E breakout board plug and play system are pre-configured and set up for your VFD and spindle Package a bit better but I will have to wait for finances.
I spoke with Corey on Friday and he mentioned in an email that I would only have to worry about the PWM 0-10V and ground located on pin 1 on the CRP560-00E but forgot to mention where those two wires might hook too so that I can get mach3 set up to control the RPM's. I really appreciate all your help and I hope you guys can help me because controlling the speed through a potentiometer is driving me crazy!
Heading to your website now and ordering more stuff, thanks guys, I love the machine!!!
It almost looks like on my vfd there is a VO connection that stands for 0-10volts output terminals of digital frequency, I am only guessing but does the VO from my VFD plugs into the 0-10volt pwm on pin 1 and if it does then would the ground from my vfd plug into the ground as well, only guessing and not going to attempt until i get some feedback.