Does anyone know how I can set up my Machine Type for a Burny Phantom?
We have an old pst file from X2 but it doesn't seem to update correctly to give me a functional nc/cnc file to run.
Thanks ahead of time for your help gang.
Ray Sr.
Results 1 to 4 of 4
-
06-29-2015, 08:42 PM #1
Registered
- Join Date
- Apr 2015
- Posts
- 6
Burny Phantom: Problems Producing nc/cnc File From MasterCAM X8
-
06-30-2015, 12:41 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 2247
Re: Burny Phantom: Problems Producing nc/cnc File From MasterCAM X8
Best bet is to contact Burny directly, they are part of Kaliburn, a division of Lincoln Electric.
Jim Colt Hypertherm
-
07-01-2015, 12:34 PM #3
Registered
- Join Date
- Apr 2015
- Posts
- 11
Re: Burny Phantom: Problems Producing nc/cnc File From MasterCAM X8
I have heard about it before, Jim. I think it's a good idea! Absolutely agree.
-
07-16-2015, 06:39 PM #4
Registered
- Join Date
- Apr 2015
- Posts
- 6
Re: Burny Phantom: Problems Producing nc/cnc File From MasterCAM X8
Thanks for the replies gang. I don't know why I didn't receive a notice that I had gotten your replies.
What we ended up doing was going to FasTech and they have a post programmer. The did a great job of coding a post (pst) for our burny to use in MasterCAM X8.
Thanks again.Haas TL 3 W
Reply With Quote
Posting Permissions
