*Note: I'm not trying to spam the forums, I just posted this originally in the wrong subforum*
**Also, please excuse my mistyping in the thread title. I have work in 20 minutes and I was in a rush*
Hello,
My brothers and I just bought this Laguna 4x4 Swift CNC Router. I'm pretty much the only guy who can kinda run it.
While testing a few programs, I noticed some big problems.
1. Projects seem to be really really tiny when not modified (Inches). They do seem to be cutting correctly,
2. The same project becomes gigantic with a G20 code added in. Also the arcs go diagonally.
3. The same project, but in Milimeters, also comes out gigantic (No G20 or G21.). However, the arcs are okay
4. I tried to cut the outline of a guitar. I don't have the code for this one, but it was to scale somehow. However, the arcs were super messed up. Picture included.
Here's the test code.
(PROGRAM NAME - PART1)
(3/8 STRAIGHT BIT TOOL - 1 DIA. - .375)
N100T1M6
N110S18000M3
N120G0G90X-.9375Y.625Z1.25
N130Z1.1
N140G1Z0.F100.
N150X-.5625F500.
N160G3X-.1875Y1.I0.J.375
N170G1Y2.
N180G2X1.Y3.1875I1.1875J0.
N190G1X5.
N200G2X5.1875Y3.I0.J-.1875
N210G1Y1.
N220G2X5.1326Y.8674I-.1875J0.
N230G1X4.1326Y-.1326
N240G2X4.Y-.1875I-.1326J.1326
N250G1X0.
N260G2X-.1875Y0.I0.J.1875
N270G1Y1.
N280G3X-.5625Y1.375I-.375J0.
N290G1X-.9375
N300Z.1F100.
N310G0Z1.25
N320M5
N330M30
The machine uses a RichAuto A11 controller, I think.
Is there something I'm missing? We literally hooked this up yesterday. I would call Laguna but they're not open on weekends, so I thought to give these forums a shot.