Hello everyone, I'm new in SolidCAM and have a question and safe for you is easy, I want to use an engraving tool 0.1mm and selecting a speed of 20000rpm I get this error, as I can fix this?
please see the attached image.
Thanks
Luis
Hello everyone, I'm new in SolidCAM and have a question and safe for you is easy, I want to use an engraving tool 0.1mm and selecting a speed of 20000rpm I get this error, as I can fix this?
please see the attached image.
Thanks
Luis
You'r machine can rotate that much?
Arikaa, I mean speed of the spindle is 2.2kw to 24000rpm , I have to mention that I am a novice in SolidCAM, so I need help
Open the machineID file and change the RPM to 24000
thanks you, I've got a video on your feedback https://www.youtube.com/watch?v=g0Rt-072Hr0
Now I have to find that post processor is compatible with my Chinese machine:drowning:
Hello everyone, I have a new problem emerged, I tried to make the paths by selecting the generic post processor fanuc.
I have an error this file is missing gMill_Generic_Fanuc_X_4x_Eval.GPP(check the image), please kindly someone can send me ?, thank you very much.
By default the gpp file is located in C:\users\public\public documents \solidcam\solidcam2015\gpptool . Check whether the file is there or not ! If the file is missing then just reinstall the post processors
I've looked but not found in the picture looks, my version is 2014, please can you share![]()
Hey,
you have to put postprocesors to that location
C:\Users\Public\Documents\SolidCAM\SolidCAM2015\Gp ptool
and then set in solidcam settings -> Default CNC-Controler , then in first row you find that location and confirm it.
You have to have 3 files for one machine with next extentions ( .GPP .PRP .vmid )
hi here is the files good luck!
Thank you very much for sharing this file :cheers:
hey bro i need those 3 files
.gpp .prp .vmid for my siemens 828d controll for solidcam
plz help
if u can send me the post processor file i shall be thankful for that
my email is [email protected]