Hi Guys,
I have had lasers before, but this is my first Chinese laser. As such I intend to share my experience with Thunder Laser, as each step with the order happens I will update this thread for the community, to help others that may wish to import.
Machine ordered:
Mars 130 Plus laser
+ With EFR ZN-1650 130w tube
+ Upgrade to 5200 Water chiller from 5000 water chiller
+ Pass-through to be sealed with metal
+ Tube is longer than machine, to be enclosed in metal extension on machine
Extras Ordered:
- extra 2 inch head and lens
- extra 4 inch head and lens
- extra 2 inch focal lens
- extra 4 inch focal lens
- extra power supply
- extra motherboard + other boards on system and RDC6442G lcd controller panel
- extra servo motor
- extra servo motor driver
- molybdenum laser reflectionmirrors - QTY 6
- 6 meter extra x, y belt
- extra open flap sensor
- extra honeycomb and frame
- extra screws for mirror mounts and lens
Events & Experience (so far):
1) 6-27-2015 - started talking to Nolan @ Thunder Laser - Nolan was very prompt to answer
2) 7-9-2015 - Placed order with Nolan at Thunder Laser - To ship within 3 weeks
3) 7-10-2015 - Wired 30% deposit to Thunder Laser, Nolan confirmed receipt - laser to ship within 3 weeks